1. Right click the desired folder.

2. Select ” Properties “.

3. Click on ” Advanced ” option.

4. Check the ” Encrypt contents to secure data ” checkbox and click OK.

5. Applying the changes to the subfolders would be more helpful since it secures the parent folder along with the contents in it.

6. Click on OK and your folder will be encrypted.

Crypto Password Protect Folder is a freeware which you could use for password protecting your private folders  in Windows 7.

Download Crypto Password Protect Folder

1. Firefox Addons

If you are a Firefox user, you could use the FlashBlock extension to improve your browsing experience and speed up you BSNL Broadband connection. Get FlashBlock extension from here. You could also make addons like FastFox and Adblock Plus to fasten Firefox.

2. Use TCP Optimizer

TCP Optimizer is a free tool to tweak your TCP/IP parameters and increase your broadband bandwidth.

3. Tweak system.ini file (Windows XP and 512 MB+ recommended)

1.Run MSINFO32.EXE from the Run command.

2. Navigate to System Summary > Hardware Resources > IRQs.

3. Find what is listed in your NIC and note down the IRQ.

4. Run SYSEDIT.EXE from the Run command.

5. Expand the system.ini file window.

6. Find ” 386enh ” which is located almost at the end.

7. Make a blank line by pressin Enter key and type Irqnumber=4096 (Replace ” number ” with the IRQ number we found earlier.

8. Save the file and restart your system.

4. Be Free Of Malwares

You should have a good security system for your PC to make sure that there is no malware in your system to block or slow down your internet connection.

Read: Best Top Antivirus Software 2010

5. Tweak using Local Group Policy Editor

1. Type ” gpedit.msc ” in Run and press enter.

2. Navigate to ” Local Computer Policy > Computer Configuration > Administrative Templates > Network > QoS Packet Scheduler > Limit Reservable Bandwidth “.

3. Tick the ” Enabled ” box.

4. Change bandwidth limit to 0% and apply the changes and restart your system.

6. Tweak DNS Servers

1. Navigate to Control Panel > Networking and Sharing Center.

2. Click on the ” Local Area Connection ” link.

3. In the window that opens, click on ” Properties “.

4. Now under the networking tab double click on the TCP/IP option to edit it.

5. Check ” Use the following DNS server addresses “.

6. Enter ” 208.67.222.222 ” in the first box and ” 208.67.220.220 ” in the second one and save the settings.

That’s all! Now your BSNL Broadband Connection will be super fast.

Does the Automatic restart feature in Windows 7 irritate you? Most probably, I think. Anyone could be irritated by that kind of a feature. So here is a way to disable it and stop Windows 7 from restarting there after. Just follow the steps given below to do it.

1. Click on Start button and go to Control Panel.

2. Select ” System ” option from the list.

3. Click on the ” Advanced system settings ” in the left pane of the window.

4. In the ” System Properties ” window, select the ” Advanced ” tab.

5. Under the ” Startup and Recovery ” section, click on ” Settings “.

6. Uncheck the ” Automatically restart ” option.

That’s all! From now on you won’t be facing the auto restart problem in Windows 7 unless you turn it on.

Windows 7 and Vista provides its users with an option called ” GodMod ” with which you could have easy access to the features and options in Windows. It helps you to administer your system a lot more easier than earlier. Though it is functioning like the Control Panel, it is very much easier to use and handle than the Control Panel.

You should surely try this secret option. It could turn out to be very helpful. For enabling GodMode in Windows 7 and Windows Vista, follow the steps given below.

NOTE: GodMode works perfectly in both 32-bit and 64-bit versions of Windows 7 and in 32-bit versions of Windows Vista. If you try this in Vista’s 64-bit versions, a system crash may occur.

1. Create a new folder in the desktop.

2. Rename it as ” {ED7BA470-8E54-465E-825C-99712043E01C} “.

4. Now you could see a new icon in the place of the folder. This is GodMode. Double-click on it and you will have easy acces to many options.

All knows what the icons of familiar programs or system options indicate. For example, even without the text under the icons of Firefox, My Computer, Recycle Bin, certain games etc, we could know what they are. So those who don’t want the text under the icons of familiar programs could hide/erase it. It is quite simple. Just follow the steps given below to do that.

1. Click once on the icon and then on its text to rename it or you could right-click on it and select ” Rename “.

2. Make sure ” Num Lock ” is on.

3. Hold Alt key and enter the value ” 255 ” from the keypad.

That’s all. Now the text will be erased and only the icon will be displayed. Now if you want to name it again, just do step 1 and name it.

It is easier to connect your mobile phone and PC/laptop with Bluetooth since it is a wireless connection. In this post, I am introducing an easy method to synchronize your Windows Mobilewith your PC/laptop using Bluetooth.If your system lack Bluetooth facility, you could use a dongle. Now follow the steps given below to sync your Windows Mobile device with your PC/laptop using bluetooth.

1. Make sure that the driver along with the dongle is installed.

2. Check whether the Bluetooth dongle is properly plugged in your PC/laptop.

3. Make sure that all the drivers are properly installed. For doing it, right-click ” My Computer “, select ” Properties “, under the ” Hardware ” tab, click ” Device Manager ” and scroll down and check whether the device has been installed or not.

4. If the device is installed and is not detected, right-click the entry and select ” Uninstall ” to uninstall it. Remove the device and connect it again and reinstall the drivers.

5. After making sure that everything is OK i.e. the device is installed correctly, go to ” Control Panel -> Hardware and Sound -> Bluetooth Devices “,  under the ” Options ” tab, check the ” Allow Bluetooth devices to find this computer ” checkbox and click ” OK “.

6. Start ” Windows Mobile Device Center “.

7. Click on ” Mobile Device Settings “.

8. Click on ” Connection Settings “.

9. Make sure that ” Allow connections to one of the following ” checkbox is ticked.

10. Make sure that ” Bluetooth ” is selected from the dropdown list and click ” OK “.

11. Open ” ActiveSync “.

12. From the menu, select ” Connect via Bluetooth “.

13. If a prompt appears which asks you if you want to set up a partnership, click ” Yes “.

14. Based on the Windows Mobile Device you are using, you could make two choices. Click ” New Partnership ” if it is a Windows Mobile Pocket PC Edition. If it is a Windows Mobile Smartphone, select ” New ” from ” Menu “.

15. When needed, enter the name of your laptop/PC.

16. If in the shared devices, the name of your PC/laptop is not displayed, then check whether the devices are connected correctly and are in range.

17. Click ” Next “.

18. After entering the passkey, again click ” Next “. Don’t forget the passkey

19. Click the pop-up that appears on your taskbar telling ” A Bluetooth device is attempting to connect with your computer “.

20. Type the same passkey that you entered earlier in the ” Add Bluetooth Device Wizard ” and click ” Next “.

21. Now, you could make two choices based on the Windows Mobile device you are using. If you are using Windows Mobile Pocket PC Phone Edition, check whether the ” ActiveSync ” checkbox is ticked in the list of services. If you are using a Windows Mobile Smartphone, click ” Next ” in the ” Display Name ” window, check whether the ” ActiveSync ” checkbox is ticked in the list of services and click ” OK ” and ” Done “.

22. Now click ” Finish ” in the Wizard.

23. Open ” ActiveSync ” in your Windows Mobile device and select ” Connect via Bluetooth ” from ” Menu ” to connect your mobile phone with your PC/laptop through Bluetooth.

That’s all!

You could Download these themes from here

1. Download and install iTunes 9.

2. Connect your iPhone with the single usb port at the back of your system. If you connect in the front some errors could occur.

3.  Run iTunes.

4. Take a full backup of you iPhone.

5. In Mac, the PwnageTool makes a Custom IPSW file which cannot be made in Windows. So, you have to download it. The following are the files.

“iPhone1,1_3.1.2_7D11_Custom_Restore” for iPhone 2G

“iPhone1,2_3.1.2_7D11_Custom_Restore” for iPhone 3G

“iPhone2,1_3.1.2_7D11_Custom_Restore” for iPhone 3GS

6. Move the IPSW file to the following locations

“C:\Documents and Settings\[username]\Application Data\Apple Computer\iTunes\iPhone Software Update\” in Windows XP

“C:\Users\[username]\AppData\Roaming\Apple Computer\iTunes\iPhone Software Updates\” in Windows Vista

“C:\Users\[username]\AppData\Roaming\Apple Computer\iTunes\iPhone Software Updates\” in Windows 7

7. Restart iTunes.

8. Now do not update your iPhone to 3.1.2 firmware with iTunes.

9. Select iPhone from the devices list in left side.

10. Hold the left Shift button and click on ” Restore “.

11. Browse and choose the custom IPSW file you downloaded and click on ” Open “.

That’s all! You have jailbroken your iPhone!

My Windows 7 Desktop

Windows 7 Skull Visual Style

Windows 7 Alpha

SiCo for Windows 7

Only Black Windows 7 Theme

Windows 98 Themes for Windows 7

Aero Hilled for Windows 7

Aero Xtreme 7 VS

Loghorn for Windows 7

Violet Windows 7 Theme

Windows 7 Blue

Windows 7 Red Theme

Aero Xtreme XS2

Windows 7 Basic Dark Blue

IE Blue for Windows 7

Seven Aero Shine Black

Seven Aero Blue Wave

Windows 7 Pack

Ribbon for Windows 7

Windows 7 Black Transparent

Sky vs for Windows 7

SevenMaxClearLiveFinal

AERO CLEAN BLUE

Windows XP Theme for Windows 7

Loghorn Style for Windows 7